The Haltech Device Emulator 8 was designed for use in “piggy back” style applications where the OEM ECU remains in the vehicle to control currently un-supported functions (eg Automatic Transmission , Electronic Throttle). The Haltech Device Emulator 8 provides the OEM ECU with emulated signals to stop fault codes when the Haltech is controlling functions like ignition, fuel and boost.
Engine Suitability: • Various
Features: • 8 x Inductive load outputs • 8 x Pull down to Ground resistor outputs • 6 x Pull up to 12V resistor outputs
Power Requirements: • Source: 8.6 to 16.5 Volts DC • Consumption: 360mA @ 12Volts DC
Physical Dimensions: • Length: 57mm • Width: 64mm • Height: 28mm
Weight: • Device Emulator: 90g (0.20 lb) • Harness: 180g (0.40 lb)
Haltech Signal Emulator Kit Includes: • Haltech Device Emulator 8 • Quick Start Guide
Optional Accessories: • 1m Harness (HT040004) • Plug and Pin Set (HT030007)